Flysky Fs Ct6b Driver

```html

How to Install and Use Flysky Fs Ct6b Driver

Flysky Fs Ct6b is a 6-channel radio transmitter that can be used to control various RC models, such as planes, helicopters, cars, and boats. It has a range of up to 500 meters and features a 2.4 GHz frequency hopping system that ensures a reliable and interference-free connection.

Flysky Fs Ct6b Driver

Get files from these links:

Link 1


Link 2


Link 3

To use the Flysky Fs Ct6b transmitter, you need to install the driver and software on your computer. The driver allows your computer to recognize the transmitter when you connect it via USB cable. The software allows you to configure the transmitter settings, such as channel mapping, servo reversing, trim, end points, dual rates, exponential, and more.

In this article, we will show you how to install and use the Flysky Fs Ct6b driver and software on Windows 10.

Step 1: Download the driver and software

You can download the driver and software from the official Flysky website: https://www.flysky-cn.com/ct6b-xiazai-1 [^1^]. The file name is CT6B-DOWNLOADS.zip and it contains two folders: Drivers & Instructions and T6config.

Extract the zip file to a location of your choice on your computer.

Step 2: Install the driver

Before you connect the transmitter to your computer, you need to install the driver first. Follow these steps:

1. Open the Drivers & Instructions folder and double-click on CP210xVCPInstaller_x64.exe if you have a 64-bit system or CP210xVCPInstaller_x86.exe if you have a 32-bit system.


2. Follow the instructions on the screen to complete the installation.


3. Restart your computer if prompted.

Step 3: Connect the transmitter to your computer

After installing the driver, you can connect the transmitter to your computer using a USB cable. Make sure the transmitter is turned off before you plug it in. Follow these steps:

1. Plug one end of the USB cable into the transmitter's trainer port, which is located on the back of the transmitter.


2. Plug the other end of the USB cable into an available USB port on your computer.


3. Turn on the transmitter by sliding the power switch on the front of the transmitter.


4. Your computer should recognize the transmitter as a new device and assign it a COM port number. You can check this by opening Device Manager and expanding Ports (COM & LPT). You should see something like Silicon Labs CP210x USB to UART Bridge (COMx), where x is the COM port number assigned to your transmitter.

Step 4: Run the software

Now that you have connected the transmitter to your computer, you can run the software to configure the transmitter settings. Follow these steps:

1. Open the T6config folder and double-click on T6config.exe to launch the software.


2. The software interface should look something like this:



3. Select your COM port number from the drop-down menu at the top right corner of the software. For example, if your transmitter is assigned COM3, select COM3.


4. Click on Read button at the bottom left corner of the software. This will read the current settings from your transmitter and display them on the software.


5. You can now modify any settings you want using the software. For example, you can change the channel mapping by clicking on Channel Map tab and selecting different options from the drop-down menus. You can also adjust other settings such as servo reversing, trim, end points, dual rates, exponential, etc. by clicking on their respective tabs.


6. After you have made all the changes you want, click on Write button at the bottom left corner of
   the software. This will write your new settings to
   679def20d6